Multitask of side curved pedestal class is designed into the model

  • Time:
  • Click:70
  • source:AYOR CNC Machining
The article narrated a mould to design the importance in mechanical production industry. Introduced side to bend the craft analysis of pedestal spare parts, discharge master drawing design, be versed in a design, mould structure design reachs mould material. This Article Describes The Importance Of Die Design In The Mechanical Manufacturing Industry.

It Includes A Technological Analysis Of The Side Bending Support; The Design Of The Layout Figure; The Design Of The Working Position; The Design Of The Die Structure And The Die Materials.

The develops pattern of stimulative home appliance development pattern of electric home appliances020.

04mm, punch and discharge double-faced clearance is board aperture 0.

060.

10 Mm. Round punch is change a structure quickly, cooperate H7/h6 with fixed head, the A-A section plane in can seeing figure above. · sunken model is used set cake form, set piece use with sunken model aperture cooperate a form to be H7/n6. · is in (1) , (3) , (5) , (7) labour, each setting guides selling, guide selling with fixed head, discharge board aperture uses H7/h6 to cooperate. · discharge board 5 use puissant spring, assure to have enough pressure-plate-force and stripping force. Discharge board support is little guide lean on a stick 11 direct accurately, can protect the working stability of small punch. · spare parts is in (5) labour bend downward, (6) be versed in an upsweep, (7) labour side direction bends, use float to support implement a 31 makings punch after since the top. Made send convenient. To make float supports implement the job is reliable, should install sending direction expedite position, the setting in this craft is in (6) labour. Die job process expect when sending first, in left / right guide makings feet 21 and 24 between forward to side edge link stopper 25 place locate, when upper mould be issued to lower levels, strong cut side edge to build edge and guide selling aperture 4 Mm. When reaching after the 2nd times to send, side edge link stopper makes thick fixed position, guide selling fixed position of essence of life. Guide selling guide makings after, discharge board impaction makings, have each industry punch. Upper mould goes up after, float supports implement 31 will since makings top. The height since the top gets side guide plate the step spacing of 26. Mould material multitask the mould work requirement that class receives a standard and general punch mould are different, because latter is to use sheet to be versed in a craft, change easily mould, adjust handy and rapid; And former because suffer the left and right sides to be versed in,the nicety of a mould alignment center is restricted, adjust use longer time with respect to need, like 10 labour class receives a standard, be about the settling time that a week influences, reduced manufacturing time so, be in so choose mould material to go up, must consider in detail. Multitask class is chosen into modular mould, need is mixed according to mould work requirement, production condition the relevant element such as the basic function of mould material, will choose economy, advanced, applicable mould material. Specific requirement is as follows: The basic function of die material looks from mould work requirement, normally requirement mould material must have 3 kinds of basic function, have namely reach hardness and intensity without wearability, tenacity. The technical properties of the material of technical properties mould of die material is a when affect mould cost main factor, the mould with good technical properties can make mould production technology simple not only, easy at make, and can reduce a mould effectively to make charge. The technical properties of mould material basically includes machinability can, heat treatment function, preform essence is changed, reach the current performance of mould material. Anyhow, multitask class rushs into the model grow, bend reach pull deep protruding, sunken model to choose hard alloy YG15, YG20. Heat treatment hardness is respectively: Strong grow HRC 66 68 of protruding, sunken model to curve HRC 64 66 of protruding, sunken model to press deep protruding, sunken standard HRC58 62 epilogue is current, multitask class receives a standard technique already more mature, promote a product quality as a kind, managing material, improve productivity, reduce facility amount, reduce labour force and the ask accord with the times new technology that control a cost, it is an advanced new and high technology that crosses a century. CNC Milling