Large work treatment uses simulation software
- Time:
- Click:93
- source:AYOR CNC Machining
45kg) . Undertake machining on machine tool of the SL 100 that this workpiece comes from Parpas America company in 5 axes, need processes the data that excises 1t above, the weight that makes its final achieves 610lb. The major work that resembles Keller company in that way, need of this spare parts is one-time achieve high accuracy requirement, need uses special cutting tool and relatively longer treatment process, it must achieve correct requirement in first time. Before software of executive Vericut simulation, this company produces cycle to run a machine tool through an imitate inside the workshop, try the machine program with spare parts of artificial means test and verify. The clearance of cutting tool is the problem of a special attention making a person, because this v aluminium is made spherical reach its special clamping apparatus agrees with to be used with form a complete set of area of work of this machine tool only. In fact, below certain circumstance, be located in whole spare parts apparently the cone-shaped recess of 51m2 is as deep as 14in (1in=25.
4mm) , make the problem becomes more severe thereby, need uses relatively longer cutting cutting tool. The be confined to of bureau of method of CAM compositive test and verify before this workshop can examine its internal CAM document only, because this can evaluate the interactive situation of cutting tool and spare parts only, inextricability the other influencing factor of this craft. And when Vericut simulation software is being installed, the process designing of Keller company member in each machine tool that inputs information the workshop, not only the route that includes each axle and other physics dimension, and still include the other parameter such as feed rate, speed and power. The warning is issued when accessing this kind of information to be able to make this system produces conflict between program and actual equipment ability. Special tool, clamping apparatus and spare parts model have the interface of CAM system to enter imitate phase through matching normally. The fictitious environment that arises from this, provide imitate content, those who make its control a system to use from the machine tool is same an aftertreatment G code undertake moving. With the CAM compositive system of file of CAM of interior of bureau be confined to is contrary, this can ensure more comprehensive ground describes the specific progress condition of the process inside the workshop. Treatment precision rises while simulation software is saving user cost. CNC Milling