Core of 3010S useless mud is broken platen operating rules
Time:
Click:107
source:AYOR CNC Machining
1, abide by " cast installation current operating rules " concerned regulation. 2, the degree of tightness that checks V belt is spent with wear out condition, if pass to tighten or wear away serious, should grant to adjust or change. 3, before the job, whether does slideway of examination platen entrance damage, the bone that do not have core blocks platen. If attaint or card live, answer to be handled in time. 4, before the job, nod first move test-drive, run for nothing next 2-3 minute, examine transmission system (electromotor, shaft coupling, reducer, V belt) , the motion of bearing circle and bogie wheel is smooth, after affirming everything is normal, fangke has production. 5, the attention in the job takes makings case, big medium an useless Ni core must attack with hammer broken, will answer the bone that use core to be taken out, forbid to enter platen along with useless Ni core. 6, in the job, often note the locomotive case with bogie wheel bearing is large rounds, discovery big group swings and annulus the face grinds smooth phenomenon, answer to look for maintenance technician in time to repair. 7, after the job, the core bone iron wire that keeps clear of to be blocked by platen crust aperture. CNC Milling